The relationship between lead and cadmium levels and functional dependence among elderly participants

The adverse impacts of lead and cadmium exposure on health outcomes have been reported in the past. Few studies have been conducted on the relationship between lead and cadmium exposures and disability. We evaluated whether lead and cadmium exposures were associated with functional dependence including the total number of disabilities, activities of daily living (ADL), instrumental activities of daily living (IADL), leisure and social activities (LSA), lower extremity mobility (LEM), and general physical activities (GPA) in an elderly population. A total of 5513 eligible subjects were enrolled in the study from the National Health and Nutrition Examination Survey 2001–2006. Serum lead and cadmium exposure assessments were performed using atomic absorption spectrometry. Functional dependence was assessed by 19 structured questions. The relationships between lead and cadmium exposures and functional dependence were investigated using by multivariable linear regression models. Q2, Q3, and Q4 of lead exposure were significantly associated with the total number of disabilities, with β coefficients of ??0.62 (95% CI ??0.99, ??0.24), ??0.64 (95% CI ??1.02, ??0.26), and ??0.81 (95% CI ??1.19, ??0.42), respectively. This relationship remained significant in males. Furthermore, we analyzed the relationships between lead and cadmium exposure quartiles and various functional dependence metrics, and we determined that lead content was significantly associated with decreased ADL, LEM, and GPA (p?<?0.05) and cadmium content was inversely associated with ADL (p?<?0.05). Our study demonstrated a strong relationship between exposure to lead and cadmium and functional dependence in an elderly population.

     

Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.     

N2O profiles in the enhanced CANON process via long-term N2H4 addition: minimized N2O production and the influence of exogenous N2H4 on N2O sources

Environmental Science and Pollution Research - Production of the greenhouse gas nitrous oxide (N2O) from the completely autotrophic nitrogen removal over nitrite (CANON) process is of growing...     

Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns?

Abstract

Objective: The current study investigated whether older drivers’ driving patterns during a customized on-road driving task were representative of their real-world driving patterns.

Methods: Two hundred and eight participants (male: 68.80%; mean age?=?81.52 years, SD?=?3.37 years, range?=?76.00–96.00 years) completed a customized on-road driving task that commenced from their home and was conducted in their own vehicle. Participants’ real-world driving patterns for the preceding 4-month period were also collected via an in-car recording device (ICRD) that was installed in each participant’s vehicle.

Results: During the 4-month period prior to completing the on-road driving task, participants’ median real-world driving trip distance was 2.66?km (interquartile range [IQR]?=?1.14–5.79?km) and their median on-road driving task trip distance was 4.41?km (IQR?=?2.83–6.35?km). Most participants’ on-road driving task trip distances were classified as representative of their real-world driving trip distances (95.2%, n?=?198).

Conclusions: These findings suggest that most older drivers were able to devise a driving route that was representative of their real-world driving trip distance. Future research will examine whether additional aspects of the on-road driving task (e.g., average speed, proportion of trips in different speed zones) are representative of participants’ real-world driving patterns.     

A fractal derivative model to quantify bed-load transport along a heterogeneous sand bed

Environmental Fluid Mechanics - Bed-load transport is a complex process exhibiting anomalous dynamics, which cannot be efficiently described using the traditional advection–diffusion...     

Biogenic palladium prepared by activated sludge microbes for the hexavalent chromium catalytic reduction: Impact of relative biomass

• Pd nanoparticles could be reduced and supported by activated sludge microbes. • The effect of biomass on Pd adsorption by microbes is greater than Pd reduction. • More biomass reduces Pd particle size, which is more dispersed on the cell surface. • When the biomass/Pd add to 6, the catalytic reduction rate of Cr(VI) reaches stable. Palladium, a kind of platinum group metal, owns catalytic capacity for a variety of hydrogenations. In this study, Pd nanoparticles (PdNPs) were generated through enzymatic recovery by microbes of activated sludge at various biomass/Pd, and further used for the Cr(VI) reduction. The results show that biomass had a strong adsorption capacity for Pd(II), which was 17.25 mg Pd/g sludge. The XRD and TEM-EDX results confirmed the existence of PdNPs associated with microbes (bio-Pd). The increase of biomass had little effect on the reduction rate of Pd(II), but it could cause decreasing particle size and shifting location of Pd(0) with the better dispersion degree on the cell surface. In the Cr(VI) reduction experiments, Cr(VI) was first adsorbed on bio-Pd with hydrogen and then reduced using active hydrogen as electron donor. Biomass improved the catalytic activity of PdNPs. When the biomass/Pd (w/w) ratio increased to six or higher, Cr(VI) reduction achieved maximum rate that 50 mg/L of Cr(VI) could be rapidly reduced in one minute.     

Locally enhanced electric field treatment (LEEFT) for water disinfection

• Nanowire-assisted LEEFT is applied for water disinfection with low voltages. • LEEFT inactivates bacteria by disrupting cell membrane through electroporation. • Multiple electrodes and device configurations have been developed for LEEFT. • The LEEFT is low-cost, highly efficient, and produces no DBPs. • The LEEFT can potentially be applicable for water disinfection at all scales. Water disinfection is a critical step in water and wastewater treatment. The most widely used chlorination suffers from the formation of carcinogenic disinfection by-products (DBPs) while alternative methods (e.g., UV, O₃, and membrane filtration) are limited by microbial regrowth, no residual disinfectant, and high operation cost. Here, a nanowire-enabled disinfection method, locally enhanced electric field treatment (LEEFT), is introduced with advantages of no chemical addition, no DBP formation, low energy consumption, and efficient microbial inactivation. Attributed to the lightning rod effect, the electric field near the tip area of the nanowires on the electrode is significantly enhanced to inactivate microbes, even though a small external voltage (usually<5 V) is applied. In this review, after emphasizing the significance of water disinfection, the theory of the LEEFT is explained. Subsequently, the recent development of the LEEFT technology on electrode materials and device configurations are summarized. The disinfection performance is analyzed, with respect to the operating parameters, universality against different microorganisms, electrode durability, and energy consumption. The studies on the inactivation mechanisms during the LEEFT are also reviewed. Lastly, the challenges and future research of LEEFT disinfection are discussed.     

不同给水管材对管壁附着生物膜铅、镉的解吸动力学研究

给水管壁生物膜会吸附水中的重金属元素积累在管壁生物膜中,在受到扰动时释放回到水体,危害饮用水水质安全。试验以上海管网末梢水为实验对象,研究了PVC、铸铁和紫铜等三种管材上生物膜对铅、镉的解吸特性。结果表明,PVC、铸铁和紫铜附着生物膜对铅的解吸容量qe分别为:5.92211μmol·m^-2、128.3051μmol·m^-2和21.1808,解吸速率常数k分别为:0.001060 m^2·μmol^-1·min^-1、0.000041 m^2·μmol^-1·min^-1和0.000503 m^2·μmol^-1·min^-1,对于镉元素三种材质的解吸容量qe分别为:14.71519μmol·m^-2、18.50481μmol·m^-2和2.25225μmol·m^-2;解吸速率常数k分别为:0.000102 m^2·μmol^-1·min^-1、0.001070 m^2·μmol^-1·min^-1和0.000103 m^2·μmol^-1·min^-1。     

基层环境监察工作的现状及措施

基层环境监察工作是环境保护工作的重要环节。本文针对基层环境监察工作的现状和存在的主要问题进行了简要分析,根据部分地区基层环境监察部门的成功经验,并就如何提高基层环境监察水平提出了一些具体措施和方法,对从事环境监察的人员有着一定的参考价值和借鉴意义。     

基于排队论的城市垃圾箱最佳间距研究

针对城市垃圾箱最佳间距的研究不够精细的现状,本文通过建立排队论模型得到了可供不同城市参考的城市垃圾箱最佳间距参数表。通过对部分城市街道的垃圾箱摆放间距情况进行实地调查,运用层次分析法将影响垃圾箱间距分布的多重因素转化为单因素;建立了基于指数分布的教学模型,利用排队论分析单因素状态下的垃圾箱间距分布,得到了求解城市垃圾箱最佳间距的一般方法。